Truck mounted workover rig – electric drived
Description:
The product series is complete. The full product range has a maximum hook load ranging from 700kN to 2250kN.
The main rig adopts AC frequency conversion speed regulation control to realize stepless speed regulation.
The control system adopts PLC control, which can be matched with automatic equipment to realize intelligent and automatic operation.
It is equipped with heavy safety protection such as over roll anti-collision, electronic anti-collision and stall protection, which is safer and more reliable.
According to the power supply of different well pads, electrical drive or diesel+electrical drive can be designed.
The small tonnage model adopts energy storage system + wellhead transformer for power supply, avoiding high-voltage power, which is safer and more convenient.
The electric, air and hydraulic circuit systems are controlled centrally, and the main components are selected by imported well-known brand.
The chassis engine is an internationally famous brand, which can meet the emission requirements for overseas markets..
Products with special environmental requirements such as alpine, desert, plateau and beach can be customized.
Description:
|
Product Model |
XJ700DBHD |
XJ900DBHD |
XJ1100DBHD |
XJ1350DBHD |
XJ1600DBHD |
XJ1800DBHD |
XJ2250DBHD |
|
Max. hook load (KN) |
700 |
900 |
1100 |
1350 |
1600 |
1800 |
2250 |
|
Rated hook load (KN) |
400 |
600 |
800 |
1000 |
1200 |
1500 |
1800 |
|
Repair depth (73mm EUE Tubing) (m) |
3200 |
4000 |
5500 |
7000 |
8500 |
-- |
-- |
|
Overhaul depth (73mm drill pipe) (m) |
2000 |
3200 |
4500 |
5800 |
7000 |
8000 |
9000 |
|
Engine power (KW) |
257 |
294 |
405 |
405 |
485 |
405×2 |
485×2 |
|
Drawwork motor power (KW) |
90 |
110 |
300 |
400 |
400 |
600 |
800 |
|
Rotary table motor power (KW) |
-- |
55 |
200 |
200 |
200 |
400 |
400 |
|
Rope number of traveling system |
6 |
6 |
8 |
8 |
8 |
10 |
10 |
|
Wire rope diameter (mm) |
Φ22 |
Φ26 |
Φ26 |
Φ26 |
Φ29 |
Φ32 |
Φ32 |
|
Mast height (m) |
17/18/21 |
21/25/29/31 |
33 |
33/35 |
35/36 |
38/39 |
38/39 |
|
Drill floor height (m) |
-- |
2.7/3.7 |
3.7/4.5 |
3.7/4.5 |
4.5/5.6 |
6/6.8 |
6/6.8/7.5 |
|
Opening diameter of rotary table (mm) |
-- |
444.5 |
444.5 |
444.5 |
444.5 |
698.5 |
698.5 |
|
Chassis drive type |
6×6 |
8×8 |
10×8 |
10×8 |
12×8 |
14×8 |
14×10 |
